How to clean a wall mounted air disinfection machine?


The steps to clean the wall mounted disinfection machine are as follows:


Power off: First confirm that the wall mounted disinfection machine has been powered off to ensure safety. 2. Disassembly: If there are detachable components on the wall mounted disinfection machine (such as deodorization filter screen, UV lamp tube, etc.), remove them. 3. Cleaning the shell: Dip a soft damp cloth in cleaning agent or soapy water, gently wipe the shell of the wall mounted disinfection machine, and ensure thorough cleaning. 4. Cleaning the interior: If it is possible to enter the interior, use detergent or mild cleaning agent, damp cloth, brush, and other tools for cleaning. Be careful not to use too much water or chemical cleaning agents to directly contact electronic components. 5. Rinse and wipe: Thoroughly rinse and wipe the inside and outside with clean water to ensure that there are no residual cleaning agents or dirt. 6. Drying: Place the wall mounted disinfection machine in a well ventilated area to dry naturally, or use a clean and dry cloth to thoroughly dry it. 7. Installation and startup: Reinstall the disassembled components, then reinstall the wall mounted disinfection machine onto the wall and connect the power supply. Please note that before cleaning the wall mounted disinfection machine, it is recommended to read the product manual first to understand the specific operating steps and precautions to ensure correct and safe cleaning.



How to disassemble and clean the Lianda air disinfection machine?


2. Open the panel of the air disinfection machine, remove the filter screen and air purification filter of the air disinfection machine (clean the filter screen with detergent, rinse it with tap water, and then dry it with a washing machine), and expose the ultraviolet lamp tube and high-voltage electrostatic field;


How to solve the problem of flashing disinfection machine lights?


The interior of the disinfection cabinet lamp tube is filled with inert gas, and the gas inside will change and flicker continuously if not used for 12 months; But as long as activated, it can be used normally without affecting its lifespan. After restarting, it can be activated. As the frequency and condition of the light usage are uncertain, the time cannot be determined.



How to use an air disinfection, sterilization, and freshening machine?


Generally speaking, there are multiple modes for air disinfection machines, such as automatic sterilization and manual sterilization, which can be selected according to needs. If it is only for disinfection, it is recommended to choose automatic sterilization mode to achieve the best effect. (2) The correct placement of the air disinfection machine should be above the ground and at a certain distance from the wall, which can make the circulation of the air disinfection machine smoother. At the same time, it should be placed away from people and pets to avoid causing harm to the body. (3) Replacing the filter element of the air disinfection machine as required is also necessary. According to the frequency of use and product requirements, corresponding replacements can be made. Long term use of unreplaceable filter elements can lead to reduced effectiveness and even have negative effects on physical health. Think it's useful, like it. Think it's useful, like it. Put it away. 1. Read the product manual carefully before use, and operate the air disinfection machine according to the manual; 2. During use, it is important to avoid the air inlet and outlet being covered by anything, which hinders the passage of air through the filtration and disinfection system; 3. Try to place the air disinfection machine in a relatively open area with a certain distance (such as 1 meter) from the wall


What is the reason for the flashing green light of the National Clean Disinfection Machine?


The interior of the disinfection cabinet lamp tube is filled with inert gas, and the gas inside will change and flicker continuously if not used for 12 months; But as long as activated, it can be used normally without affecting its lifespan. After restarting, it can be activated. As the frequency and condition of the light usage are uncertain, the time cannot be determined.